- Chargehand Linesmen/Linesworkers required
- £320 to £330 per day
- 3 gangs required for locations in Somerset, Essex and Milton Keynes
- National Grid authorisations preferred but not essential
- The client will consider applications from overseas workers requiring a visa with the relevant transmission experience
To be considered for the Chargehand Linesman position you must have demonstrated sufficient technical knowledge and experience in your role as a Leading Hand, 2 years with the Company or 3 years in the UK industry.
Responsibilities for Linesworker
Safety
-
Work safely ensuring the safety of Colleagues and Public in all site based activities
-
Maintain knowledge of and implement safety procedures at all times
-
Undertake daily and pre-use inspections of PPE and climbing equipment
-
Confidently carry out tower rescue procedures
-
Report all potential hazards and incidents that have or could have resulted in personal injury or environmental damage.
-
Ensuring that you have and use the correct access, tools, equipment and personal protective equipment for the work.
-
Work at height safely in accordance with legal, Client and Company requirements
-
Attend training as required
-
Be responsible for all general and system safety requirements on site
-
Manage a team of 3 – 6 men
Quality
-
Maintain a very high standard of quality throughout all working practices
-
Work to a high level of housekeeping maintaining a good level of cleanliness across site and within welfare facilities and vehicles.
-
Engage with Supervisors and Client Engineers to build a healthy and mutual working relationship
-
Adhering to Permit to Work and Limited Access Certificates document
-
Operate various items of plant machinery and tools near and around electrical distribution lines
-
Lead by example
-
Take Permits under your Network Authorisation
-
Complete the necessary paperwork as per company and client requirements
-
Attend pre work meetings
Productivity
-
Be mindful of timescales and productivity to meet Client set targets
-
Work on various OHL systems ranging from 132 – 400Kv, (single, twin, triple and quad bundled conductors)
-
Replace overhead line conductor(re-wire/ tension stringing)
-
Work from platforms, jumper baskets and ladders at height on overhead line steel towers
-
Install jay stops and conductor stockings
-
Install non tension and tension compression joints (ACCC/ACSR)
-
Steel tower erecting and dismantling
-
Steel work replacement
-
Remove and install anti climbing devices
-
Work on puller tensioner sites
-
Tower painting activities
-
Training and supervising other less experienced members of the team
-
Be responsible to oversee all works on your site
-
Any other duties as required